Improvement of an efficient separation method for chemicals in diesel exhaust particles: analysis for nitrophenols

GOAL, SCOPE, AND BACKGROUND: Diesel exhaust is believed to consist of thousands of organic constituents and is a major cause of urban pollution. We recently reported that a systematic separation procedure involving successive solvent extractions, followed by repeated column chromatography, resulted in the isolation of vasodilatory active nitrophenols. These findings indicated that the estimation of the amount of nitrophenols in the environment is important to evaluate their effect on human health. The isolation procedure, however, involved successive solvent extractions followed by tedious, repeated chromatography, resulting in poor fractionation and in a significant loss of accuracy and reliability. Therefore, it was crucial to develop an alternative, efficient, and reliable analytical method. Here, we describe a facile and efficient acid-base extraction procedure for the analysis of nitrophenols. MATERIALS AND METHODS: Diesel exhaust particles (DEP) were collected from the exhaust of a 4JB1-type engine (ISUZU Automobile Co., Tokyo, Japan). Gas chromatography-mass spectrometry (GC-MS) analysis was performed with a GCMS-QP2010 instrument (Shimadzu, Kyoto, Japan). RESULTS: A solution of DEP in 1-butanol was extracted with aqueous NaOH to afford a nitrophenol-rich oily extract. The resulting oil was methylated with trimethylsilyldiazomethane and subsequently subjected to GC-MS analysis, revealing that 4-nitrophenol, 3-methyl-4-nitrophenol, 2-methyl-4-nitrophenol, and 4-nitro-3-phenylphenol were present in significantly higher concentrations than those reported previously. DISCUSSION: Simple acid-base extraction followed by the direct analysis of the resulting extract by GC-MS gave only broad peaks of nitrophenols with a poor detection limit, while the GC-MS analysis of the sample pretreated with (trimethylsilyl)diazomethane gave satisfactorily clear chromatograms with sharp peaks and with a significantly lowered detection limit (0.5 ng/ml, approximately 100 times). CONCLUSION: The present method involving an acid-base extraction, in situ derivatization, and GC-MS analysis has shown to be a simple, efficient, and reliable method for the isolation and identification of the chemical substances in DEP.     

Relevance of coplanar PCBs for TEQ emission of fluidized bed incineration and impact of emission control devices

Five fluidized bed incinerators combusting municipal solid waste were assessed for the impact of coplanar PCBs on total TEQ emission. In 17 stack measurements, the coplanar PCBs contributed on average less than 3% to total TEQ with a maximum contribution of 7.5% to total TEQ in one measurement. Differences in the design of the flue gas cooling section did not show an effect on the impact of coplanar PCBs on total TEQ. The effect of emission control devices on the impact of coplanar PCBs on the total TEQ was studied in more detail at one incinerator. The relative contribution of PCBs to total TEQ increased along the flue gas line. This was caused by a slightly higher removal efficiency for TEQ relevant PCDDs/PCDFs compared to coplanar PCBs by the bag filters and a higher destruction efficiency for PCDDs/PCDFs compared to PCBs by the SCR catalyst. Additionally, the removal efficiencies of the emission control devices (bag filters and catalyst) for other chlorinated aromatic compounds which have been proposed as TEQ indicator compounds (polychlorinated benzenes and polychlorinated phenols) were compared with those for PCDDs/PCDFs and coplanar PCBs. Removal efficiencies for polychlorinated benzenes or polychlorinated phenols considerably differed from those of PCDD/PCDF and coplanar PCBs. Implications for TEQ assessments using indicator compounds as proposed in the literature are discussed.     

Polychlorinated dibenzo-p-dioxins and dibenzofurans in sediment, soil, fish, shellfish and crab samples from Tokyo Bay area, Japan

Concentrations of tetra- to octa-chlorinated dibenzo-p-dioxins and dibenzofurans in samples collected in or near Tokyo Bay, Japan, with a densely inhabited catchment area, were congener-specifically determined and discussed. Analyzed in this study were samples of surface sediment covering the whole bay area, reference soil representing atmospheric impact, and fish, shellfish and crab commonly consumed as food. The range of concentrations were comparable to or higher than those in other parts of Japan. The origins of these compounds in the catchment area of the bay were investigated in terms of homolog and isomeric compositions in the sediment samples. Biota-sediment accumulation factors for benthic species declined as the degree of chlorination increased.     

Examination of dioxin fluxes recorded in dated aquatic-sediment cores in the Kanto region of Japan using multivariate data analysis

Past dioxin (coplanar polychlorinated biphenyl (Co-PCB), 2,3,7,8-substituted polychlorinated dibenzo-p-dioxin (PCDD) and 2,3,7,8-substituted polychlorinated dibenzofuran (PCDF)) fluxes recorded in dated aquatic-sediment cores were analyzed using principal component analysis (PCA). The data set consisted of samples from four cores collected from the Kanto region of Japan. Time trends and spatial differences in the dioxin flux were examined, and the potential relationship to emission sources was investigated. Twenty-five compounds and 58 core slices, corresponding to the later half of the 20th century, were subjected to the analysis. The PCA of both log-transformed and maximum-value-standardized data successfully divided the dioxin compounds into a small number of groups, and three similar clusters of Co-PCBs, PCDDs and penta- to hepta-CDFs were identified. PCB formulations used in the past are judged to have been responsible for the major part of the Co-PCB flux recorded in the sediment cores. However, the relationship to emission sources needs further investigation. It is suggested that most 2,3,7,8-substituted PCDDs and PCDFs are different from Co-PCBs in their emission sources or movements in the environment. The subcore clusters obtained from the PCA of log-transformed data show that the cores from different sampling areas exhibited distinct dioxin fluxes and compositions. Common time trends among the cores were more effectively summarized by the PCA of maximum-value-standardized data focusing on relative time trends. PC scores show that recently the flux of each dioxin compound in the four cores has been generally declining after having reached a peak.     

Sorption of biodegradation end products of nonylphenol polyethoxylates onto activated sludge

IntroductionRecently ,nonylphenolpolyethoxylates (NPnEO (n :numberofethoxyunits(EOs) )havebecomeaproblematicissueforthereasonthatthesecompounds,animportantgroupofnonionicsurfactants ,havebeenusedwidelyinvariousindustriesasflocculants,dispersants,emulsifie…     

Alteration of manganese distribution in organs of rats treated with streptozotocin

This work was carried out under the Visiting Researcher's Programme of the Research Reactor Institute, Kyoto University.     

Formation of PCDF, PCDD, PCB, and PCN in de novo synthesis from PAH: mechanistic aspects and correlation to fluidized bed incinerators

The difference of polychlorinated dibenzofurans (PCDF) isomer patterns between stoker type incinerators and some fluidized bed incinerators (FBI) is a key to understand the formation mechanisms in both types of incinerators. The total yield and the isomer patterns of PCDF, polychlorinated biphenyls (PCB), polychlorinated naphthalenes (PCN), and polychlorinated benzenes (PCBz) formed via de novo synthesis from polycyclic aromatic hydrocarbons (PAH) indicate that chlorinated aromatics in the FBI are formed as a result of PAH breakdown. The detailed analysis of the isomer patterns of PCDF, PCB and PCN gives a first insight into the transformation mechanism of the PAHs and the sequence of degradation, chlorination and oxygen insertion. The major chlorination takes part at the position of the C-C cleavage during degradation of the PAHs. Further chlorination of the hydrogen position of the former PAH takes part preferably in ortho-position to this chlorination or is directed by incorporated oxygen. A perylene structure in soot is proposed as basis for the observed PCDF pattern in the FBI. Polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated phenols (PxCP) were formed in lower concentrations from the de novo experiments indicating an additional formation pathway for these compounds in the FBI.     

Determination of dioxin concentrations in fish and seafood samples using a highly sensitive reporter cell line, DR-EcoScreen cells

There is a strong need for the development of relatively rapid and low-cost bioassays for the determination of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), and dioxin-like polychlorinated biphenyls (dl-PCBs) in environmental and food samples. In this study, we applied a reporter gene assay using DR-EcoScreen cells (DR-cell assay), which is highly sensitive to dioxins, to the determination of PCDD/Fs and dl-PCBs in fish and seafood samples. The PCDD/Fs and dl-PCBs were extracted from homogenated samples (10 g) of 30 fish and shellfish, purified by clean-up procedure using a multilayered silica gel column and an alumina column, and applied to DR-cell assay. Interestingly, the bioanalytical equivalent (BEQ) values obtained from the DR-cell assay [<0.1 ∼ 5.4 pg BEQ g⁻¹ wet weight (ww)] were closely correlated with the toxicity equivalent (TEQ) values from conventional high-resolution gas chromatography/high-resolution mass spectrometry (HRGC-HRMS) analysis (r² = 0.912), and the slope of regression line was 0.913. Therefore, we multiplied the BEQ values from the DR-cell assay by a conversion coefficient (1.095, the reciprocal of 0.913) to approximate the TEQ values from the HRGC-HRMS analysis. Furthermore, we used this DR-cell assay to perform a prescreening test of PCDD/Fs and dl-PCBs in 16 fish and seafood samples purchased from a supermarket, revealing that a sample from the fatty flesh of a bluefin tuna exceeded 8 pg TEQ g⁻¹ ww (the European Union-tolerance limit). Taken together, these results suggest that the DR-cell assay might be applicable as a rapid and low-cost prescreening method to determine dioxin levels in fish and seafood samples.